Configuration settings

To configure the PI extractor, you must create a configuration file. This file must be in YAML format. The configuration file is split into sections, each represented by a top-level entry in the YAML format. Subsections are nested under a section in the YAML format.

You can use either the sample complete or minimal configuration files included with the installer as a starting point for your configuration settings:

• config.default.yml - This file contains all configuration options and descriptions.

• config.minimal.yml - This file contains a minimum configuration and no descriptions.

Naming the configuration file

You must name the configuration file config.yml.

Tip

You can set up extraction pipelines to use versioned extractor configuration files stored in the cloud.

Before you start

• Optionally, copy one of the sample files in the config directory and rename it to config.yml.
• The config.minimal.yml file doesn't include a metrics section. Copy this section from the example below if the extractor is required to send metrics to a Prometheus Pushgateway.
• Set up an extraction pipeline and note the external ID.

Minimal YAML configuration file

The YAML settings below contain valid PI extractor 2.1 configurations. The values wrapped in ${} are replaced with environment variables with that name. For example, ${COGNITE_PROJECT} will be replaced with the value of the environment variable called COGNITE_PROJECT.

The configuration file has a global parameter version, which holds the version of the configuration schema used in the configuration file. This document describes version 3 of the configuration schema.

version: 3

cognite:
  project: '${COGNITE_PROJECT}'
  idp-authentication:
    tenant: ${COGNITE_TENANT_ID}
    client-id: ${COGNITE_CLIENT_ID}
    secret: ${COGNITE_CLIENT_SECRET}
    scopes:
      - ${COGNITE_SCOPE}

time-series:
  external-id-prefix: 'pi:'

pi:
  host: ${PI_HOST}
  username: ${PI_USER}
  password: ${PI_PASSWORD}

state-store:
  database: LiteDb
  location: 'state.db'

logger:
  file:
    level: 'information'
    path: 'logs/log.log'

metrics:
  push-gateways:
    - host: 'https://prometheus-push.cognite.ai/'
      username: ${PROMETHEUS_USER}
      password: ${PROMETHEUS_PASSWORD}
      job: ${PROMETHEUS_JOB}

where:

• version is the version of the configuration schema. Use version 3 to be compatible with the Cognite PI extractor 2.1.

• cognite is the how the extractor reads the authentication details for PI (pi) and CDF (cognite) from environment variables. Since no host is specified in the cognite section, the extractor uses the default value, <https://api.cognitedata.com >, and assumes that the PI server uses Windows authentication.

• time-series configures the extractor to create time series in CDF where the external IDs will be prefixed with pi:. You can also use a data set ID configuration to add all time series created by the extractor to a particular data set.

• state-store configures the extractor to save the extraction state locally using a LiteDB database file named state.db.

• logger configures the extractor to log at information level and outputs log messages to a log file in the logs/log.log directory. By default, new files are created daily and retained for 31 days. The date is appended to the file name.

• metrics points to the Prometheus Pushgateway hosted by CDF. It assumes that a user has already been created. For the Pushgateway hosted by CDF, the job name (${PROMETHEUS_JOB}) must start with the username followed by '-'.

Using values from Azure Key Vault

The PI extractor also supports loading values from Azure Key Vault. To load a configuration value from Azure Key Vault, use the !keyvault tag followed by the name of the secret you want to load. For example, to load the value of the my-secret-name secret in Key Vault into a password parameter, configure your extractor like this:

password: !keyvault my-secret-name

To use Key Vault, you also need to include the key-vault section in your configuration, with the following parameters:

Parameter	Description
keyvault-name	Name of Key Vault to load secrets from
authentication-method	How to authenticate to Azure. Either default or client-secret. For default, the extractor will look at the user running the extractor, and look for pre-configured Azure logins from tools like the Azure CLI. For client-secret, the extractor will authenticate with a configured client ID/secret pair.
client-id	Required for using the client-secret authentication method. The client ID to use when authenticating to Azure.
secret	Required for using the client-secret authentication method. The client secret to use when authenticating to Azure.
tenant-id	Required for using the client-secret authentication method. The tenant ID of the Key Vault in Azure.

Example:

key-vault:
  keyvault-name: my-keyvault-name
  authentication-method: client-secret
  tenant-id: 6f3f324e-5bfc-4f12-9abe-22ac56e2e648
  client-id: 6b4cc73e-ee58-4b61-ba43-83c4ba639be6
  secret: 1234abcd

Timestamps and intervals

In most places where time intervals are required, you can use a CDF-like syntax of [N][timeunit], for example 10m for 10 minutes or 1h for 1 hour. timeunit is one of d, h, m, s, ms. You can also use a cron expression in some places.

For configuring the earlies point to backfill to you can use a similar syntax. [N][timeunit] and [N][timeunit]-ago. 1d-ago means 1 day in the past from the time history starts, and 1h means 1 hour in the future. For instance, you can use this syntax to configure the backfill only recent history.

Configure the PI extractor

Configuration for the PI extractor. Each section configures a different aspect of the extractor.

Parameter	Type	Description
version	integer	Version of the config file, the extractor specifies which config file versions are accepted in each version of the extractor.
logger	object	Configuration for logging to console or file. Log entries are either Fatal, Error, Warning, Information, Debug, or Verbose, in order of decreasing priority. The extractor will log any messages at an equal or higher log level than the configured level for each sink.
metrics	object	Configuration for publishing metrics.
cognite	object	Configure connection to Cognite Data Fusion (CDF)
state-store	object	Include the state-store section to configure the extractor to save the extraction state periodically. This makes the extraction resume faster in the next run. This section is optional. If not present, or if database is set to none, the extraction state is restored by querying the timestamps of the first and last data points of each time series. If CDF Raw is used as a state store, you can see the extracted ranges under Manage staged data in CDF.
pi	object	Configure the extractor to connect to a particular PI server or PI collective. If you configure the extractor with a PI collective, the extractor will transparently maintain a connection to one of the active servers in the collective. The default settings provide Active Directory authorization to the PI host when the server account for the Windows service is authorized.
time-series	object	Include the time-series section for configuration related to the time series ingested by the extractor. This section is optional.
events	object	Configuration for writing events on reconnect and data loss incidents
extractor	object	The extractor section contains various configuration options for the operation of the extractor itself. The options here can be used to extract only a subset of the PI points in the server. This is how the list is created: 1. If include-tags, include-prefixes, include-patterns or include-attribute-values are not empty, start with the union of these three. Otherwise, start with all points. 2. Remove points as specified by exclude-tags, exclude-prefixes, exclude-patterns and exclude-attribute-values.
backfill	object	Include the backfill section to configure how the extractor fills in historical data back in time with respect to the first data point in CDF. The backfill process completes when all the data points in the PI Data Archive are sent to CDF or when the extractor reaches the target timestamp for all time series if the to parameter is set.
frontfill	object	Include the frontfill section to configure how the extractor fills in historical data forward in time with respect to the last data point in CDF. At startup, the extractor fills in the gap between the last data point in CDF and the last data point in PI by querying the archived data in the PI Data Archive. After that, the extractor only receives data streamed through the PI Data Pipe. These are real-time changes made to the time series in PI before archiving.
high-availability	object	Configuration for a Redis based high availability store. Requires Redis to be configured in state-store.

logger

Global parameter.

Configuration for logging to console or file. Log entries are either Fatal, Error, Warning, Information, Debug, or Verbose, in order of decreasing priority. The extractor will log any messages at an equal or higher log level than the configured level for each sink.

Parameter	Type	Description
console	object	Configuration for logging to the console.
file	object	Configuration for logging to a rotating log file.
trace-listener	object	Adds a listener that uses the configured logger to output messages from System.Diagnostics.Trace

console

Part of logger configuration.

Configuration for logging to the console.

Parameter	Type	Description
level	either verbose, debug, information, warning, error or fatal	Required. Minimum level of log events to write to the console. If not present, or invalid, logging to console is disabled.
stderr-level	either verbose, debug, information, warning, error or fatal	Log events at this level or above are redirected to standard error.

file

Part of logger configuration.

Configuration for logging to a rotating log file.

Parameter	Type	Description
level	either verbose, debug, information, warning, error or fatal	Required. Minimum level of log events to write to file.
path	string	Required. Path to the files to be logged. If this is set to logs/log.txt, logs on the form logs/log[date].txt will be created, depending on rolling-interval.
retention-limit	integer	Maximum number of log files that are kept in the log folder. Default value is 31.
rolling-interval	either day or hour	Rolling interval for log files. Default value is day.

trace-listener

Part of logger configuration.

Adds a listener that uses the configured logger to output messages from System.Diagnostics.Trace

Parameter	Type	Description
level	either verbose, debug, information, warning, error or fatal	Required. Level to output trace messages at

metrics

Global parameter.

Configuration for publishing metrics.

Parameter	Type	Description
server	object	Configuration for having the extractor start a Prometheus scrape server on a local port.
push-gateways	list	A list of pushgateway destinations to push metrics to. The extractor will automatically push metrics to each of these.

server

Part of metrics configuration.

Configuration for having the extractor start a Prometheus scrape server on a local port.

Parameter	Type	Description
host	string	Required. Host name for local Prometheus server, must be exposed to some prometheus instance for scraping. Examples: localhost 0.0.0.0
port	integer	Required. The port used for a local Prometheus server.

push-gateways

Part of metrics configuration.

A list of pushgateway destinations to push metrics to. The extractor will automatically push metrics to each of these.

Parameter	Type	Description
host	string	Required. URI of the pushgateway host Example: http://my.pushgateway:9091
job	string	Required. Name of the Prometheus pushgateway job.
username	string	Username for basic authentication
password	string	Password for basic authentication
push-interval	integer	Interval in seconds between each push to the gateway. Default value is 1.

cognite

Global parameter.

Configure connection to Cognite Data Fusion (CDF)

Parameter	Type	Description
project	string	CDF project to connect to.
idp-authentication	object	The idp-authentication section enables the extractor to authenticate to CDF using an external identity provider (IdP), such as Microsoft Entra ID (formerly Azure Active Directory). See OAuth 2.0 client credentials flow
host	string	Insert the base URL of the CDF project. Default value is https://api.cognitedata.com.
cdf-retries	object	Configure automatic retries on requests to CDF.
cdf-chunking	object	Configure chunking of data on requests to CDF. Note that increasing these may cause requests to fail due to limits in the API itself
cdf-throttling	object	Configure the maximum number of parallel requests for different CDF resources.
sdk-logging	object	Configure logging of requests from the SDK
nan-replacement	either number or null	Replacement for NaN values when writing to CDF. If left out, NaN values are skipped.
extraction-pipeline	object	Configure an associated extraction pipeline
certificates	object	Configure special handling of SSL certificates. This should never be considered a permanent solution to certificate problems
metadata-targets	object	Configuration for targets for time series metadata.

idp-authentication

Part of cognite configuration.

The idp-authentication section enables the extractor to authenticate to CDF using an external identity provider (IdP), such as Microsoft Entra ID (formerly Azure Active Directory). See OAuth 2.0 client credentials flow

Parameter	Type	Description
authority	string	AInsert the authority together with tenant to authenticate against Azure tenants. Default value is https://login.microsoftonline.com/.
client-id	string	Required. Enter the service principal client id from the IdP.
tenant	string	Enter the Azure tenant.
token-url	string	Insert the URL to fetch tokens from.
secret	string	Enter the service principal client secret from the IdP.
resource	string	Resource parameter passed along with token requests.
audience	string	Audience parameter passed along with token requests.
scopes	configuration for either list or string
min-ttl	integer	Insert the minimum time in seconds a token will be valid. If the cached token expires in less than min-ttl seconds, it will be refreshed even if it is still valid. Default value is 30.
certificate	object	Authenticate with a client certificate

certificate

Part of idp-authentication configuration.

Authenticate with a client certificate

Parameter	Type	Description
authority-url	string	Authentication authority URL
path	string	Required. Enter the path to the .pem or .pfx certificate to be used for authentication
password	string	Enter the password for the key file, if it is encrypted.

cdf-retries

Part of cognite configuration.

Configure automatic retries on requests to CDF.

Parameter	Type	Description
timeout	integer	Timeout in milliseconds for each individual request to CDF. Default value is 80000.
max-retries	integer	Maximum number of retries on requests to CDF. If this is less than 0, retry forever. Default value is 5.
max-delay	integer	Max delay in milliseconds between each retry. Base delay is calculated according to 125*2^retry milliseconds. If less than 0, there is no maximum. Default value is 5000.

cdf-chunking

Part of cognite configuration.

Configure chunking of data on requests to CDF. Note that increasing these may cause requests to fail due to limits in the API itself

Parameter	Type	Description
time-series	integer	Maximum number of timeseries per get/create timeseries request. Default value is 1000.
assets	integer	Maximum number of assets per get/create assets request. Default value is 1000.
data-point-time-series	integer	Maximum number of timeseries per datapoint create request. Default value is 10000.
data-point-delete	integer	Maximum number of ranges per delete datapoints request. Default value is 10000.
data-point-list	integer	Maximum number of timeseries per datapoint read request. Used when getting the first point in a timeseries. Default value is 100.
data-points	integer	Maximum number of datapoints per datapoints create request. Default value is 100000.
data-points-gzip-limit	integer	Minimum number of datapoints in request to switch to using gzip. Set to -1 to disable, and 0 to always enable (not recommended). The minimum HTTP packet size is generally 1500 bytes, so this should never be set below 100 for numeric datapoints. Even for larger packages gzip is efficient enough that packages are compressed below 1500 bytes. At 5000 it is always a performance gain. It can be set lower if bandwidth is a major issue. Default value is 5000.
raw-rows	integer	Maximum number of rows per request to cdf raw. Default value is 10000.
raw-rows-delete	integer	Maximum number of row keys per delete request to raw. Default value is 1000.
data-point-latest	integer	Maximum number of timeseries per datapoint read latest request. Default value is 100.
events	integer	Maximum number of events per get/create events request. Default value is 1000.
sequences	integer	Maximum number of sequences per get/create sequences request. Default value is 1000.
sequence-row-sequences	integer	Maximum number of sequences per create sequence rows request. Default value is 1000.
sequence-rows	integer	Maximum number of sequence rows per sequence when creating rows. Default value is 10000.
instances	integer	Maximum number of data modeling instances per get/create instance request. Default value is 1000.

cdf-throttling

Part of cognite configuration.

Configure the maximum number of parallel requests for different CDF resources.

Parameter	Type	Description
time-series	integer	Maximum number of parallel requests per timeseries operation. Default value is 20.
assets	integer	Maximum number of parallel requests per assets operation. Default value is 20.
data-points	integer	Maximum number of parallel requests per datapoints operation. Default value is 10.
raw	integer	Maximum number of parallel requests per raw operation. Default value is 10.
ranges	integer	Maximum number of parallel requests per get first/last datapoint operation. Default value is 20.
events	integer	Maximum number of parallel requests per events operation. Default value is 20.
sequences	integer	Maximum number of parallel requests per sequences operation. Default value is 10.
instances	integer	Maximum number of parallel requests per data modeling instances operation. Default value is 4.

sdk-logging

Part of cognite configuration.

Configure logging of requests from the SDK

Parameter	Type	Description
disable	boolean	True to disable logging from the SDK, it is enabled by default
level	either trace, debug, information, warning, error, critical or none	Log level to log messages from the SDK at. Default value is debug.
format	string	Format of the log message. Default value is CDF ({Message}): {HttpMethod} {Url} {ResponseHeader[X-Request-ID]} - {Elapsed} ms.

extraction-pipeline

Part of cognite configuration.

Configure an associated extraction pipeline

Parameter	Type	Description
external-id	string	External ID of the extraction pipeline
frequency	integer	Frequency to report Seen to the extraction pipeline in seconds. Less than or equal to zero will not report automatically. Default value is 600.

certificates

Part of cognite configuration.

Configure special handling of SSL certificates. This should never be considered a permanent solution to certificate problems

Parameter	Type	Description
accept-all	boolean	Accept all remote SSL certificates. This introduces a severe risk of man-in-the-middle attacks
allow-list	list	List of certificate thumbprints to automatically accept. This is a much smaller risk than accepting all certificates

allow-list

Part of certificates configuration.

List of certificate thumbprints to automatically accept. This is a much smaller risk than accepting all certificates

Each element of this list should be a string.

metadata-targets

Part of cognite configuration.

Configuration for targets for time series metadata.

Parameter	Type	Description
raw	object	Configuration for writing metadata to CDF Raw.
clean	object	Configuration for enabling writing metadata to CDF Clean.

raw

Part of metadata-targets configuration.

Configuration for writing metadata to CDF Raw.

Parameter	Type	Description
database	string	Required. The Raw database to write to.
timeseries-table	string	Name of the Raw table to write timeseries metadata to, enables writing metadata to Raw. Metadata in this case includes name, description, and unit.

clean

Part of metadata-targets configuration.

Configuration for enabling writing metadata to CDF Clean.

Parameter	Type	Description
timeseries	boolean	Set to false to disable writing metadata to time series. Default value is True.

state-store

Global parameter.

Include the state-store section to configure the extractor to save the extraction state periodically. This makes the extraction resume faster in the next run. This section is optional. If not present, or if database is set to none, the extraction state is restored by querying the timestamps of the first and last data points of each time series. If CDF Raw is used as a state store, you can see the extracted ranges under Manage staged data in CDF.

Parameter	Type	Description
location	string	Required. Path to .db file used for storage, or name of a CDF RAW database.
database	either None, LiteDb or Raw	Which type of database to use. Default value is None.
interval	string	Enter the time between each write to the state store. 0 or less disables the state store. Format is as given in Intervals. Default value is 10s.
time-series-table-name	string	Table name in Raw/Redis/LiteDB for storing time series state. Default value is ranges.
extractor-table-name	string	Table name in Raw/Redis/LiteDB for storing general extractor state. Default value is extractor.
redis	boolean	Use a redis state store. Overrides database.

pi

Global parameter.

Configure the extractor to connect to a particular PI server or PI collective. If you configure the extractor with a PI collective, the extractor will transparently maintain a connection to one of the active servers in the collective. The default settings provide Active Directory authorization to the PI host when the server account for the Windows service is authorized.

Parameter	Type	Description
host	string	Required. Enter the hostname or IP address of the PI server or the PI collective name. If the host is a collective member name, connect to that member.
username	string	Enter the username to use for authentication. Leave this empty if the Windows service account under which the extractor runs is authorized in Active Directory to access the PI host.
password	string	Enter the password for the given username, if any.
native-authentication	boolean	Determines whether the extractor will use native PI authentication or Windows authentication. The default value is false, which indicates Windows authentication.
parallelism	integer	Insert the number of parallel requests to the PI server. If backfill-parallelism is set, this excludes backfill requests. Default value is 1.
backfill-parallelism	integer	Insert the number of parallel requests to the PI server for backfills. This allows the separate throttling of backfills. The default value is 0, which means that the value in parallelism is used.
use-member-priority	boolean	When connecting to a PI Collective, attempt to connect to the member with highest priority. If set to false, attempt to connect to the member with the same name as host.
max-connection-retries	integer	The maximum number of times to attempt to connect to the PI server before failing fatally. If this is 0, retry forever.

time-series

Global parameter.

Include the time-series section for configuration related to the time series ingested by the extractor. This section is optional.

The example would create time series on the following form in CDF:

{
 "externalId": "pi:12345",
 "name": "PI-Point-Name",
 "isString": false,
 "isStep": false,
 "dataSetId": 1234567890123456
}

Example:

external-id-prefix: 'pi:'
external-id-source: SourceId
data-set-id: 1234567890123456

Parameter	Type	Description
external-id-prefix	string	Enter the external ID prefix to identify the time series in CDF. Leave empty for no prefix. The external ID in CDF will be this prefix followed by either the PI Point name or PI Point ID.
external-id-source	either Name or SourceId	Enter the source of the external ID. Name means that the PI Point name is used, while SourceID means that the PI Point ID is used. Default value is Name.
data-set-id	integer	Specify the data set to assign to all time series controlled by the extractor, both new and current. If you don't configure this, the extractor will not change the current time series' data set.
data-set-external-id	string	Specify the external ID of the data set to use, see data-set-id. Using this requires the dataSets:READ ACL in CDF
sanitation	either Remove, Clean or None	Specify what to do when the time series fields exceed CDF limits. Remove will skip any time series that fail sanitation. Clean will truncate and remove values to conform to limits. None does nothing (requests may fail as a result). External IDs are never truncated, any time series exceeding CDF limits will be skipped to avoid external ID collisions, regardless of this configuration. Default value is Clean.
update-metadata	boolean	Enable updating time series if extractor configuration or PI metadata changes. Default value is True.
space-id	string	Data modeling space id, this parameter will override data-set-id and switch the extractor destinationfrom Asset-Centric model TimeSeries to Core Data Model TimeSeries with the ExtractorTimeSeries extension.
source-id	string	Data modeling source id, this parameter will override the external id of the source node in data modeling, which defaults to the host parameter from PI server configuration.

events

Global parameter.

Configuration for writing events on reconnect and data loss incidents

The example configuration produces events on the following form

{
  "externalId": "pi-events:PiExtractor-2020-08-04 01:01:21.395(0)",
  "startTime": 1596502850668,
  "endTime": 1596502880393,
  "type": "DataLoss",
  "subtype": "DataPipeOverflow",
  "source": "PiExtractor",
  "dataSetId": 1234567890123456
}

Example:

source: PiExtractor
external-id-prefix: 'pi-events:'
data-set-id: 1234567890123456
store-extractor-events-interval: 5m

Parameter	Type	Description
source	string	Events have this value as the source in CDF.
external-id-prefix	string	Set an external ID prefix to identify events in CDF. Leave empty for no prefix.
data-set-id	integer	Select a data set to assign to all events created by the extractor. We recommend using the same data set ID used in the Time series section.
data-set-external-id	string	Data set external ID added to events written to CDF, see data-set-id. Using this requires the dataSets:READ ACL in CDF
store-extractor-events-interval	string	Store events in CDF with this interval. Format is as given in Intervals. If this is not set, events are not created in CDF. Examples: 10s 5m

extractor

Global parameter.

The extractor section contains various configuration options for the operation of the extractor itself. The options here can be used to extract only a subset of the PI points in the server. This is how the list is created:

1. If include-tags, include-prefixes, include-patterns or include-attribute-values are not empty, start with the union of these three. Otherwise, start with all points.
2. Remove points as specified by exclude-tags, exclude-prefixes, exclude-patterns and exclude-attribute-values.

Parameter	Type	Description
include-tags	list	List of tag names to include.
include-prefixes	list	List of tag name prefixes to include.
include-patterns	list	List of substrings of tag names to include.
include-attribute-values	list	List of attribute values to include.
exclude-tags	list	List of tag names to exclude.
exclude-prefixes	list	List of tag name prefixes to exclude.
exclude-patterns	list	List of substrings of tag names to exclude.
exclude-attribute-values	list	List of attribute values to exclude.
time-series-update-interval	either string or integer	Interval between checks for new time series in PI. Format is as given in Intervals, this option accepts cron expressions. Default value is 24h.
deleted-time-series	object	Include the deleted-time-series subsection to configure how the extractor handles time series that exist in CDF but not in PI. This subsection is optional, and the default behavior is none (do nothing).
end-of-stream-interval	string	Interval for fetching the end-of-stream timestamps from PI. Format is as given in Intervals.
end-of-stream-chunking	integer	Maximum number of time series per end-of-stream request. Default value is 10000.
end-of-stream-throttle	integer	Maximum number of parallel end-of-stream requests. Default value is 10.
time-series-update-throttle	integer	Maximum number of parallel time series updates. Default value is 10.
dry-run	boolean	Set this to true to run the extractor in dry-run mode, where it does not push any data to CDF. Useful for testing the connection to the PI Server
read-extracted-ranges	boolean	Set this to true to disable reading from CDF on extractor startup. If this is set to false it is strongly recommended to have a state-store configured, or the extractor will read all history from PI on every run. Default value is True.
status-codes	object	Configuration for ingesting status codes to CDF timeseries.

include-tags

Part of extractor configuration.

List of tag names to include.

Each element of this list should be a string.

include-prefixes

Part of extractor configuration.

List of tag name prefixes to include.

Each element of this list should be a string.

include-patterns

Part of extractor configuration.

List of substrings of tag names to include.

Each element of this list should be a string.

include-attribute-values

Part of extractor configuration.

List of attribute values to include.

Parameter	Type	Description
key	string	Attribute name
value	string	Attribute value

exclude-tags

Part of extractor configuration.

List of tag names to exclude.

Each element of this list should be a string.

exclude-prefixes

Part of extractor configuration.

List of tag name prefixes to exclude.

Each element of this list should be a string.

exclude-patterns

Part of extractor configuration.

List of substrings of tag names to exclude.

Each element of this list should be a string.

exclude-attribute-values

Part of extractor configuration.

List of attribute values to exclude.

Parameter	Type	Description
key	string	Attribute name
value	string	Attribute value

deleted-time-series

Part of extractor configuration.

Include the deleted-time-series subsection to configure how the extractor handles time series that exist in CDF but not in PI. This subsection is optional, and the default behavior is none (do nothing).

Note

This only affects time series with the same data set ID and external ID prefix as the time series configured in the extractor

To find time series that exist in CDF but not in PI, the extractor:

• Lists all time series in CDF that have the configured external ID prefix and data set ID
• Filters the time series using the include/exclude rules defined in the extractor section.
• Matches the result against the time series obtained from the PI Server after filtering these using the include/exclude rules.

Parameter	Type	Description
behavior	either None, Flag or Delete	Select the action taken by the extractor. Setting this to Flag will perform soft deletion: Flag the time series as deleted but don't delete them from CDF. Setting it to Delete will delete the time series from CDF. If you set this to Delete, the time series in CDF that cannot be found in PI will be permanently deleted from CDF.. Default value is None.
flag-name	string	If you've set behavior to Flag, use this string to mark the time series as deleted. Metadata is added to the time series with this as the key, and the current time as the value. Default value is deletedByExtractor.
time-series-delete-throttle	integer	Maximum number of parallel delete operations. Default value is 10.

status-codes

Part of extractor configuration.

Configuration for ingesting status codes to CDF timeseries.

Parameter	Type	Description
status-codes-to-ingest	either GoodOnly, Uncertain or All	Which data points to ingest to CDF. All ingests all datapoints, including bad. Uncertain ingests good and uncertain data points. GoodOnly ingest only good datapoints. Default value is GoodOnly.

backfill

Global parameter.

Include the backfill section to configure how the extractor fills in historical data back in time with respect to the first data point in CDF. The backfill process completes when all the data points in the PI Data Archive are sent to CDF or when the extractor reaches the target timestamp for all time series if the to parameter is set.

Parameter	Type	Description
skip	boolean	Set to true to disable backfill.
step-size-hours	integer	Step, in whole number of hours. Set to 0 to freely backfill all time series. Each iteration of backfill will backfill all time series to the next step before stepping further backward. This helps even out the progression of long backfill processes. Default value is 168.
to	string	The target CDF timestamp in miliseconds at which to stop the backfill. Format is as given in Timestamps and intervals, -ago can be added to make a relative timestamp in the past. Default value is 0. Example: 3d-ago
time-series-delay	integer	Delay in milliseconds between each time series backfill request within a step.
step-delay	integer	Delay in milliseconds between each step.
retry-bucket-size	integer	Maximum size of the retry bucket. Zero or less for no limit. Default value is 100.
retry-bucket-cleanup-time	integer	Delay in seconds between each cleanup of the retry bucket. Default value is 3600.

frontfill

Global parameter.

Include the frontfill section to configure how the extractor fills in historical data forward in time with respect to the last data point in CDF. At startup, the extractor fills in the gap between the last data point in CDF and the last data point in PI by querying the archived data in the PI Data Archive. After that, the extractor only receives data streamed through the PI Data Pipe. These are real-time changes made to the time series in PI before archiving.

Note

When data points are archived in PI, they may be subject to compression, reducing the total amount of data points in a time series. Therefore, the backfill and frontfill tasks will receive data points after compression, while the streaming task will receive data points before compression. Learn more about compression in this video.

Parameter	Type	Description
skip	boolean	Set this to true to disable frontfill and streaming.
streaming-interval	string	Interval between each call to the PI Data Pipe to fetch new data. Format is as given in Intervals. If you set this parameter to a high value, there is a higher chance of having a client outbound queue overflow in the PI server. Overflow may cause loss of data points in CDF.. Default value is 1s.
delete-data-points	boolean	If you set this to true, the corresponding data points are deleted in CDF when data point deletion events are received in the PI Data Pipe. Enabling this parameter may increase the streaming latency of the extractor since the extractor verifies the data point deletion before proceeding with the insertions.
use-data-pipe	boolean	Older PI servers may not support data pipes. If that's the case, set this value to false to disable data pipe streaming. The frontfiller task will run constantly and will frequently query the PI Data Archive for new data points. Default value is True.
time-series-chunk	integer	The maximum number of time series in each frontfill query to PI. The chunks will be adapted according to the density of data points per time series. Default value is 1000.
data-points-chunk	integer	The maximum number of requested data points in each frontfill query to PI. Default value is 10000.

high-availability

Global parameter.

Configuration for a Redis based high availability store. Requires Redis to be configured in state-store.

Parameter	Type	Description
interval	string	Interval to update the high availability state in Redis. Format is as given in Intervals.
timeout	integer	Timeout in seconds before taking over as active extractor. Must be set greater than 0 to enable high availability.