Saltar al contenido principal

Trends

The Trends section automatically shows the most relevant time series on a tag. You can select other time series on the tag from the side panel. You can also use the Compare trends function in the top right corner to compare with time series from other tags.

You select which time series to show as trends by adding time series from the Other time series on this tag section to the Recently selected time series section. The default time window when you open the Trend page is 1 day, but you can adjust this with the time interval selection. If the time series streams from a source system with alarm limits and value ranges, you'll find these listed above the time series graph and on the time series card. Note that alarm limits and ranges with no values aren't displayed.

The default y-axis setting is computed based on last year's values, disregarding any out-of-bounds values, typically when sensors fail. You can show and hide the Y-axis with the Toggle Y-axis button.

View trends
note

There can be a short time delay when you view trend data. You can see the time difference between "now" and the sensor timestamp of the last data point in the brackets in the legend.

To get a more in-depth insight into instruments, you can compare time series by adding them to the same page.

  1. Select the Compare trends button or the Compare icon on a mobile unit this icon

  2. Search for time series by tag name or description. On a mobile unit, you can even scan the tag ID.

  3. Select Add.

You'll find the time series in the Recently selected time series section.